Skip to product information
1 of 11

BIY Big Twin Evo Hardtail Kit

BIY Big Twin Evo Hardtail Kit

Each kit is built to order with a current lead time of approximately 2 weeks from the order date. Order now to reserve your spot in our production schedule!

We made the BIY (Build It Yourself) Big Twin Evo Hardtail Kit for qualified fabricators who want more freedom to customize their frame geometry and keep their build budget in check. The loose component design allows you to establish rail angles, axle plate position, and rear section width during assembly, opening up custom geometry options that would be harder to achieve with a fully assembled kit. Designed primarily for aftermarket frames without factory castings, the kit can also be fitted to stock frames.

You handle the fitting, alignment, and welding. A flat plate seatpost yoke, two lower rail diameter options, and connections you fit yourself let you work around your existing chassis and the chopper you have in mind.

All tubing is supplied long and requires final cutting to length and coping during fit up and installation. The lugs are slugged to fit inside the tubing and slotted to fit over the pancake axle plates.

Made in the USA.

For qualified fabricators and welders after stock rigid geometry, our prefabricated Big Twin Evo hardtail is the BIY’s easier cousin. More of the fabrication is already handled, making installation simpler and saving you time and labor.

We also offer installation of our prefabricated kits through our service program. Send us your bare frame and let us handle the hardtail installation, so you can get on with the rest of your build. We do not offer installation of BIY kits through our service program.

Bottom Rail Tubing Size
Regular price $765.00
Regular price Sale price $765.00
Sale Sold out

WHY IT RULES

  • Lower upfront cost. Put your fabrication skills to work and keep more money available for the rest of your build.
  • More room for customization. Set rail angles, axle plate position, and rear section width during fabrication to suit your project.
  • Two lower rail sizes. Choose 1" or 1-1/8" outside diameter tubing to match your existing frame rails.
  • Flat plate seatpost yoke and axle plates. Designed with aftermarket frame construction in mind.
  • Transmission posts. Trim the height and cope the ends to suit your frame geometry.
  • Lug connections at the axle plates. Separate lugs connect the plates to the upper and lower rails, allowing more flexibility with rail angles during assembly. Matching lugs are available for both tubing sizes.

WHAT'S iN THE BOX

  • Upper and lower frame rails and cross members
  • Axle plates
  • Rail-to-axle-plate lugs matched to your selected tubing size
  • Flat plate seatpost yoke
  • Transmission support and threaded posts
  • Tubing connection slugs
  • Axle adjuster nuts

Installation

This kit puts the fabrication in your hands. Expect to cut, cope, fit, align, and weld the components to suit your existing chassis and intended geometry.

The transmission posts are left uncoped so you can trim and shape them to your application. Slugs are intended for every tubing-to-tubing connection. Because frame tubing varies, the slugs may require machining to match the inside diameter of your frame tubes.

The lugs connect the rails to the axle plates, allowing you to establish the rail angles during assembly. Final geometry and alignment must be established and verified during fabrication. A frame jig is highly recommended.

This kit is intended for qualified metal fabricators with motorcycle frame fabrication experience. Krispy does not offer installation of the BIY kit through our service program.

Axle setup

We recommend 9" axle plate spacing as a starting point for a traditional Panhead style rear section. The BIY layout also gives qualified builders room to establish a different width or axle plate position for a custom application.

Your axle and locating hardware must match the axle plate openings and your finished frame width.

Check out our 3/4" Rear Axle Kit, along with our axle adjusters. Confirm dimensions against your planned setup, especially if you’re changing the rear section width.

Fitment

  • Intended for Big Twin Evo softail frame projects, particularly aftermarket frames without factory castings.
  • Can also be fitted to stock frames. Each chassis requires individual assessment and fitting.
  • Available with 1" or 1-1/8" outside diameter lower rails. Measure your existing frame tubing before selecting an option.
  • A frame jig is highly recommended for installation.
  • Fitment starts with the chassis. Shovelhead swingarm frames and Evo Softail frames have different layouts and require the appropriate hardtail kit. For Shovelhead frame projects, check out our BIY Panhead/Shovelhead Hardtail Kit.
  • Final transmission support fitment, axle spacing, and component clearances must be established during fabrication.
View full details